The Tile and Stone Blog

Tile and Stone Maintenance

Page 9 of 19

How To Deal With Streaks on Limestone

Question – “Hi, I am a cleaning contractor and have a customer who has a limestone floor in a reception of a hotel which has been maintained by some one else. It is only 6 months old and has gone streaky. I have dealt with marble and other stone before but not limestone. What would you recommend?”

Our Answer – “Limestone is a calcium based stone, just like marble (in fact, marble was once a limestone, before nature subjected it to many years of heat and pressure). Limestone is typically much Continue reading

Copyright Ian Taylor and The Tile and Stone Blog.co.uk, 2013. See copyright notice above.

How To Seal Terracotta – Step By Step

Back in the 1980’s there was a bit of a craze for using terracotta. It was everywhere, in magazines, on TV, and it was soon being used extensively in homes and also in commercial properties like pubs and wine bars. After a few years it seemed to disappear almost as fast. This is due in part to the over-exposure and the ever changing fashions for interior design, but I also suspect that more than a few people experienced a number of headaches in terms of sealing, cleaning and maintaining it.However, all things work in circles right? Well not exactly, but I do see that Terracotta is making a little bit of a come back, not like the last time, but people are it seems one again being swayed by the rustic charms and warm tones and using it in selected areas.

So, I though it timely to do a little article on the methods for sealing terracotta. There are basically two systems (and lots of variations for both) : Continue reading

Copyright Ian Taylor and The Tile and Stone Blog.co.uk, 2013. See copyright notice above.

How To Remove Grout Haze From A Limestone Floor?

Visitor’s Question: “I have a problem with a newly laid Limestone floor. The tiler left it with a very thick haze of grout on it.I have tried a Fila Residue Remover cleaner, and another Grime remover (which seemed to work only a little better). I have used non-scratch pads and an emulsifier pad – on my hands and knees and it is still there. Please help?”

Our Answer: Continue reading

Copyright Ian Taylor and The Tile and Stone Blog.co.uk, 2013. See copyright notice above.

How To Remove Sealer and Sealing Residues?

Most weeks I receive calls from people asking how to remove a sealer residue. Sealer residues occur when an impregnating sealer is incorrectly applied. Impregnating sealers (or penetrating sealers as they are sometimes known) are intended to be in or below the surface of the stone rather than ‘on’ it. So, the correct application involves applying the sealer to the surface, allowing a short time for penetration (this might be around 5 minutes, depending on both the sealer being used and the material being sealed) then any surplus sealer, remaining on the surface should be removed with something absorbent, ideally a white paper or cotton towel.All too often though, for various reasons this Continue reading

Copyright Ian Taylor and The Tile and Stone Blog.co.uk, 2013. See copyright notice above.
« Older posts Newer posts »
Follow
Get every new post delivered to your inbox
Join millions of other followers
Powered By WPFruits.com